Hiren’s BootCD 16.2 is a free to download boot CD that contains various diagnostic programs. Among them, you can find some that will help you solve problems like virus infection, HDD failure, data recovery, hard disk partitioning and, most importantly for this article, forgetting your password.
Filename: HBCDPEx64.iso(Special thanks to our Supporters for maintaining fast and reliable mirror servers): Filesize: 1292.04 MB ( bytes) ISO MD5. วิธีนี้ใช้ตั้งแต่ Hiren’s Boot CD Version 9.7 ขึ้นไปนะครับ และเครื่อง Com ต้อง Boot USB ได้ด้วยนะครับ สำหรับ v.9.6 ลงไปอ่าน ที่นี่ ครับ. Hiren’s boot CD is one of the very few useful toolkits that will help in resolving any type of computer boot issues, scanning malwares, backup and restore PC data, recovering Windows password etc. To create Hirens boot USB you will need following things.
Step 1
Connect USB Pen Drive (1GB or more)
Step 2
Download and Run USB Disk Storage FormatUSBFormat.zip (34KB)
Step 3
Download grubinst_guigrub4dos.zip (179KB) and Run as Administrator
Step 4
Insert the BootCD (10.3 or newer) in the CD Drive and Copy everything from CD to USB Flash Drive
Step 5
Copy grldr and menu.lst from grub4dos.zip (or from HBCD folder) to the usb drive
Step 6
Test Your USB Drive (read bottom of the page for troubleshoot)
Make sure you set your computer to boot from USB Flash Drive
To Enter the BIOS press the 'Del' button on your keyboard. Alternatives are'F1', 'F2', 'Insert', and 'F10'. Some PC's BIOS might even require a differentkey to be pressed. Commonly a PC will show a message like'Press [Del] to enter Setup' to indicate that you need to press the 'Del' key.Some AMI BIOS require you to enable the option 'USB Keyboard Legacy support'!
For AMI BIOS:
- Go to 'Feature Setup'. 'Enable' these options: 'USB Function Support',
'USB Function For DOS' and 'ThumbDrive for DOS'. Go to 'Advanced Setup'.
Set the '1st Boot Device' to 'USB RMD-FDD'.
Reboot the PC and it now should boot from the Usb Stick. - Go to 'USB Mass Storage Device Configuration'. Select 'Emulation Type'
and set it to 'Harddisk'. Go to the 'Boot Menu' and set the '1st boot device' to 'USB-Stick'. Exit the BIOS, saving the changes.
you can try 'Emulation Type' to 'Floppy' or 'Forced FDD'.
For PHOENIX/AWARD BIOS:
- Go to 'Advanced BIOS Features'. Go to the '1st Boot device' and set it to 'USB-ZIP'.
Troubleshoot
If you cannot install grub4dos (or you get 'cannot run background program' message) then use syslinux to boot grub4dos